Poker table progress...

The only steps left are to pad and vinyl the rails then  host a game!

	Marking the radius of the round edges of our table. Total size is 42x82".  This will seat 10.		Sanding out the rough edges of the rail.
	A close up of the marks		A look at the rail.  Note the playing surface leaning against the car.  The rail will rest on top of the playing surface by 2".
	Cutting our basic shape.		Preparing to add our 1/4" foam to the top of our the playing surface.  (We have already attached legs so we can now officially call this a table.)
	The majority of this project is using the jigsaw!		Gluing down the foam.

	Drilling a pilot hole in order to cutout the top of our 4" rail.		A peak at the foam surface with the rail resting on top.
	Cutting the rail.		The tables after the felt was attached.  Sorry there are no pictures of this but we needed all hands for this part.
	Attaching the 2" bottom rail to the 4" top rail. The entire rail section will fit snug over the playing surface.		A glimpse of the felted table with the rail resting on top.  Last step is to pad, vinyl and attach the rail and trim the excess materials.